How to Install Z Brick Veneer: A Step-by-Step Guide

Z‑BRICK ® veneer is a fantastic way to enhance the look of any interior or exterior space. Whether you want to give your home a rustic, old-world charm or a sleek, modern appeal, installing Z‑BRICK ® is a simple and effective method to achieve the desired aesthetic. Unlike traditional brick and stone installations, which often involve complex processes and the use of metal lath or metal grid systems, Z‑BRICK ® products simplify the process by offering an adhesive solution called Z‑MENT ®. The ease of installation lies in the fact that the thin coat of Z‑MENT ® not only acts as an adhesive but also serves as the mortar line, eliminating the need for additional materials. With Z‑BRICK ®, transforming any space into a stunning masterpiece has never been easier.

How Do You Install Z-Brick?

To install Z-BRICK, you’ll first need to apply a thin coat of Z-MENT, which is the adhesive used for the installation. Make sure to cover the entire area where the bricks will be placed.

Once the adhesive has been applied, you can then press the individual Z-BRICK stones or bricks into place. It’s important to ensure that each stone or brick is pressed firmly into the adhesive, so that it adheres properly. The adhesive will also serve as the mortar line between the bricks, eliminating the need for additional mortar.

Another advantage of using Z-BRICK is that there’s no requirement for a metal lath or a metal grid system during installation. This makes the installation process much simpler and quicker, as you don’t have to worry about securing these additional materials.

When installing the Z-BRICK, it’s recommended to start from the bottom and work your way up. This will help ensure that the bricks are properly aligned and that they’re evenly spaced. It’s also important to periodically check and adjust the alignment and spacing as you go along.

Once all the bricks have been installed, it’s important to let the adhesive dry and cure completely before applying any finishing touches or grouting. Following these steps will result in a professionally installed Z-BRICK facade that’s durable and long-lasting.

Watch this video on YouTube:

When it comes to installing Z-Brick, an ideal adhesive choice is Z-Ment. This powerful adhesive not only securely fastens Z-Brick to the wall but also acts as the mortar line. Suitable for both interior and exterior applications, Z-Ment ensures a strong bond that withstands the test of time.

What Glue Can I Use to Install Z-Brick?

Z-Ment is a specialized adhesive that’s designed specifically for fastening Z-Brick to the wall. With it’s exceptional strength, it ensures a secure and durable bond that will withstand the test of time. Whether you’re working on an interior or exterior project, Z-Ment is versatile enough to be used in both applications.

This means that not only does it bond the Z-Brick to the wall, but it also creates the mortar effect between the bricks, enhancing the overall look and authenticity of the installation.

When using Z-Ment, it’s important to follow the application instructions carefully. Ensure that the surfaces are clean and dry before applying the adhesive. You can use a trowel or a notched trowel to spread the adhesive evenly on the wall, ensuring full coverage.

With it’s exceptional strength and ability to double as a mortar line, it ensures a secure and professional installation every time.

Tips for Preparing Surfaces Before Installing Z-Brick

Preparing surfaces before installing Z-Brick is an essential step to ensure a successful and long-lasting installation. First, start by cleaning the surface thoroughly to remove any dirt, dust, or debris. Use a mild detergent and water solution and scrub the surface with a brush or sponge. Rinse with clean water and allow it to dry completely. Next, inspect the surface for any cracks or imperfections. Fill any holes or cracks with an appropriate patching compound, and smooth it out with a putty knife. Sand the patched areas to create a level surface. Finally, apply a primer or bonding agent to the surface to promote proper adhesion. Allow the primer to dry before proceeding with the Z-Brick installation.

In addition, brick veneer is cost-effective and relatively easy to install, making it a popular choice for homeowners looking to add an authentic touch to their interior or exterior spaces. Whether you opt for real or faux brick veneer, the installation process can be a rewarding and fulfilling project that you can tackle on your own.

Can You Install Brick Veneer Yourself?

It’s also a cost-effective option compared to traditional brick installation, as it requires less material and labor. Installing brick veneer yourself is certainly possible with the right tools and a bit of patience.

To start the process, first, determine whether you want to opt for real brick veneer or a faux alternative. Real brick veneer offers the authentic look and texture, as it’s made from actual brick. On the other hand, faux brick veneer is manufactured using materials such as concrete or clay to mimic the appearance of brick. Both options have their advantages and can transform the aesthetic of your home.

Once you’ve chosen your preferred type of veneer, it’s time to gather the necessary materials and tools. These typically include brick veneer, mortar, a trowel, a notched trowel, a brick saw, a level, and a tape measure. It’s important to ensure that you’ve enough veneer to cover your desired area, as well as enough mortar to secure the bricks in place.

Before you begin the installation process, youll need to prepare the surface where the veneer will be applied. Ensure that the surface is clean, dry, and free from any loose debris. If necessary, you may need to install a layer of moisture barrier or wire mesh to promote better adhesion.

Next, start applying the mortar onto the surface using the trowel, ensuring to create a flat and even layer. Then, press the brick veneer onto the mortar, using a twisting motion to ensure better adhesion. Make sure to leave a small gap between each brick to allow for expansion and contraction.

Continue this process until the entire area is covered with veneer, periodically using a level to check for evenness. Use a brick saw to trim any excess veneer to fit corners or edges, ensuring a seamless finish.

Lastly, allow the mortar to dry for the recommended time provided by the manufacturer. Once dried, you can clean up any excess mortar and enjoy your newly installed brick veneer. Remember to follow safety guidelines, such as wearing protective gear and consulting any relevant manuals or resources, to ensure a successful and safe installation process.

Tips for Maintaining and Cleaning Brick Veneer

Maintaining and cleaning brick veneer is an essential aspect of it’s longevity and aesthetic appeal. Regular maintenance can help prevent damage and keep it looking it’s best. Here are some tips to ensure your brick veneer stays in top condition:

1. Inspect for damage: Regularly examine the brick veneer for any signs of cracks, loose mortar, or damage. Addressing these issues early can prevent further deterioration.

2. Clean gently: Use a soft-bristle brush or a garden hose with low-pressure water to remove dirt, dust, and debris from the surface. Avoid using high-pressure water or harsh chemicals as they can damage the brick veneer.

3. Remove stains carefully: For stubborn stains, mix water with a mild detergent and gently scrub the affected area with a soft brush. Rinse thoroughly with clean water afterward.

4. Repair mortar joints: If you notice any loose or deteriorated mortar joints, it’s crucial to have them repaired promptly. Hire a professional mason to ensure proper restoration.

5. Avoid abrasive materials: Never use abrasive tools or cleaning agents that could scratch or chip the brick veneer. This includes wire brushes, sandpaper, or acidic cleaners.

6. Seal the brick: Consider applying a suitable brick sealant or water repellent to protect the veneer from moisture absorption, staining, and damage caused by freeze-thaw cycles. Follow the manufacturer’s instructions for application.

7. Control landscaping: Ensure that plants, vines, or trees near the brick veneer are adequately pruned and maintained. Overgrown vegetation can cause moisture retention and encourage mold growth.

Remember, regular maintenance and gentle cleaning are key to preserving the beauty and durability of your brick veneer. When in doubt, consult with professionals experienced in brick veneer maintenance.

Source: Do It Yourself! Why Most DIY Homeowners Choose Brick Veneer

Watch this video on YouTube:

Installing brick veneer is a popular way to add a touch of rustic charm to a space. While it may seem like a complex project, it can be done with the right materials and tools. To get started, you’ll need the following materials: brick veneer (approximately 6 boxes for a 40 sq. ft. wall), Loctite Power Grab adhesive (around 5 tubes), a caulk gun, square dowel rods (preferably 3/8 inch), plastic sheeting, painter’s tape, and a laser level or standard level. Additionally, having a tile saw, tile snap cutter, or handheld tile snap snipper can greatly assist in cutting the brick veneer.

What Do You Need to Install Brick Veneer?

When it comes to installing brick veneer, there are several materials that you’ll need to get the job done. The amount of brick veneer required will depend on the size of the wall you’re covering, but on average, you can expect to use around 6 boxes for every 40 square feet of wall space.

We recommend using Loctite Power Grab, a reliable adhesive that provides excellent adhesion to various surfaces. For a typical installation, you’ll need approximately 5 tubes of adhesive.

To apply the adhesive, you’ll require a caulk gun. This tool allows for precise and controlled application of the adhesive, ensuring that it spreads evenly on the back of each brick.

To ensure that your brick veneer installation is plumb and level, you’ll need a square dowel rod. This measuring tool helps you maintain straight lines and proper spacing between bricks. We recommend using a 3/8 inch dowel rod for this purpose.

When working with brick veneer, it’s important to protect the surrounding areas. To do this, you’ll need plastic sheeting and painters tape. Simply cover any adjacent surfaces or fixtures that you want to keep free from adhesive or mortar.

Lastly, you’ll need a level to ensure that your brick veneer is installed straight and level. You can use a laser level or a standard level depending on your preference and the accuracy required for your project. Additionally, if you need to make any cuts or adjustments to the bricks, a tile saw, tile snap cutter, or handheld tile snap snipper can be useful tools.

By gathering all the necessary items, you can ensure a successful and aesthetically pleasing installation.


In conclusion, installing Z‑BRICK ® veneer is a straightforward and hassle-free process. This not only simplifies the installation but also saves time and effort. So, go ahead and transform your space with the timeless charm of Z‑BRICK ® veneer.

Scroll to Top